Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

 4 in stock

 17654760 GU17654760 17 65 47 60
 1765 4760 1765.4760 17.65.47.60

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

 4 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Black 45 degree rubber cap for brakeline banjo union with master cylinder

Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959

 3 in stock

 39663801 GU39663801 39 66 38 01
 3966 3801 3966.3801 39.66.38.01

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

 3 in stock

 20325410 GU20325410 20 32 54 10
 2032 5410 2032.5410 20.32.54.10

Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

 3 in stock

12735100-z 12735100 GU12735100 12 73 51 00
 1273 5100 1273.5100 12.73.51.00

Steel front left brake pipe with threaded connectors at each end

Rigid brake line

 3 in stock

 17658950 GU17658950 17 65 89 50
 1765 8950 1765.8950 17.65.89.50

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Black brake lever for PS12 and PS15 round master cylinders. Can also be used as clutch lever on some Ducati models that have hydraulic clutches

Includes threaded preload ajuster

 2 in stock

14605650-z 14605650 GU14605650 14 60 56 50
 1460 5650 1460.5650 14.60.56.50

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda

Pair of front brake shoes. Used as front brake shoes on V7 Sport and 850 GT, and rear brake shoes on 850T

Also known as Guzzi ref. 17637400, 12620805

 2 in stock

 14620805 GU14620805 14 62 08 05
 1462 0805 1462.0805 14.62.08.05

External return spring for rear brake master cylinder

Some models use 70mm spring FUA17667 for rear master cylinder - we recommend measuring yours before ordering

 2 in stock

 17667651 GU17667651 17 66 76 51
 1766 7651 1766.7651 17.66.76.51